Simple Logger® II Model L562

The Simple Logger® II Model L562 is a two channel Volt/Amp data logger. The choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand. Extended Recording Mode XRMTM and delayed start time are just two of the many application friendly features. The Simple Logger® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the inputs are ignored between measurement intervals.

NOTE: The following current probe accessories will also need the Adapter Cat. #2118.46 which is sold separately:
1000-24-1-1 | 1000-24-2-1 | 1000-36-2-1 | 6000-36-2-0.1 | MN03 | MN255 | MN353 | MN373 | MN375 | SR752 | SR759

NOTE: The following current probe accessories DO NOT need an adapter:
MN251T | MN261 | LM103 | MN05 | MN103 | SR661 | MF 3000-24-1-1 

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
L562 2126.35 Simple Logger® II Model L562 $490.00 Consult Factory for Availability
ModelL562
Cat. #2126.35
DescriptionSimple Logger® II Model L562
List Price$490.00
Consult Factory for Availability

Model L562- Cat. #2126.35: Includes set of (2) color-coded 5 ft voltage leads and alligator clips (red/black), (2) 1.5V AA batteries, USB type A to 5 pin Mini-B, USB thumb drive supplied with DataView® software and a user manual.

Print
Channels Two
Connection Current Channel Voltage channel
Input BNC 4 mm safety banana jacks
Ranges (2) 0 to 1 V for use with current probe with mV output 5 to 600 VAC
Accuracy (50/60Hz) (10 to 50) mV: ±(0.5% R +1mV)
(50 to 1000) mV ±(0.5% R +0.5mV)
(5 to 50) V: ±(0.5% R +1V)
(50 to 600) V: (0.5% R +0.5V)
Resolution 0.1 mVAC 0.1 VAC
Maximum Input Voltage 5 rms or ±7.07 VPeak 1.2 x 600 Vrms or 720 Vrms
Input Impedance 800 kΩ 40 MΩ
Sample Rate 64 samples / cycle
Storage Rate Programmable from 125 ms to 1 per day
Storage Modes Start/Stop, FIFO, extended mode (XRM) and Alarm
Recording Length 15 minutes to 6 weeks, programmable using DataView
Memory 240,000 measurements (512 kB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication USB 2.0 optically isolated
Power Source (2) 1.5 V AA (LR6) alkaline batteries
Battery Life 100 h to >45 d (depending on sample rate/recording length)
Dimensions (4.94 x 2.75 x 1.28) in / (125 x 70 x 32)  mm
Weight (with Battery) 6.4 oz (180 g)
Case Polycarbonate
Operating Temperature (14 to 122) °F (-10 to 50) °C
Storage Temperature (-4 to 140) °F (-20 to 60) °C
Relative Humidity Up to 85 % @ 95 °F (35)°C
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32 600V CAT III Pollution Degree 2

User Manuals

Quick Start Guides

Datasheets

Brochures

Comparison Charts

Software

DataView® Software

Ver. 3.63.0006     |   Models Supported by DataView

Release Date: September 29, 2023

DataView® Complete

Contains report generation and ALL DataView® control panels. If you don't want to download the entire DataView® package, simple scroll below to locate individual component installers.

Self-extracting Executable: v3.63.0006 .exe — We recommend you use the executable file to simplify the installation process. Click on the link to download it, double-click on the downloaded .exe file to begin the installation process, and follow the installation prompts.

Zipped File: v3.63.0006 (1.08 GB). zip — Alternatively you can manually extract the files from the zipped file. Please note: you should NEVER install these files from within the zipped file. You MUST extract them prior to installing.

 

IMPORTANT:

  • Back-up all template files before installation to ensure that they do not get overwritten.
  • Uninstall previous version of DataView before installing a new version.
  • PQL Loggers and Sentinel Series are no longer supported by DataView. See bottom of the page for a compatible version

Supported Operating Systems:
Windows 10 (32 & 64 Bit)
Widows 11 Pro

Minimum System Requirements

Click here for the Minimum System Requirements



Below are the individual DataView component installers

This is the DataView core report generation software without any control panels

DataviewCore3630006.exe format

DV Release Notes

NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 1110, 1246, 1227, 1510, 1550, 1821, 1822, 1823, L452, DL913, and DL914

Download v2.02.0293 .exe format

DL Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports model 8510

Download v1.02.0006 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports model 6417

Download v1.02.0011 .exe format

GTC Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6470, 6470-B, 6471, 6472, and 6474

Download v1.06.0009 .exe format

GTT Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6116, 6116N, and 6117

Download v1.07.0022 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 1060, 5060, 5070, 6550, 6555, 6526, 6532, and 6534

Download v4.02.0071 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6240, 6250, 6255, and 6292

Download v1.07.0005 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8220, 8230, 3945, 3945-B, 407, 607, and 8335 (if using firmware ≤2.8)

Download v3.08.0019 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8333, 8335 (if using firmware >2.8), 8336, 8435, 8436

Download v1.07.13010 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8345

Download v1.2.14966 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: PEL 52, PEL102, PEL103, and PEL105

Download v2.8.15349 .exe format

PEL Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: L261, L264, CL601, L702, L101, L102, L104, L642, L111, L432, AL834, ML912, ML914, L322, L562, L564, L404, and L481

Download v1.05.0014 .exe format

SL II Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.



NOTE: PQL Loggers and Sentinel Series are no longer supported by DataView.

To obtain an older version of DataView that is compatible for these instruments, click the link below:

Download v3.09.0008 - .zip format

Supported Operating Systems:
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)

LabView Drivers

Procedures for installing the LabView drivers.   LabView Installation PDF

Digital Multimeters - MTX-3292B, MTX3292BT, MTX3293B, MTX3293-BT
Ver. 1.0 LabView Drivers
 
  Megohmmeters
Ver. 1.0 Model 1060 Overview PDF
Ver. 1.1 Models 5060 & 5070 Overview PDF
Ver. 1.0 Models 6550 & 6555 Overview PDF
 
  Power Quality & Energy
Ver. 1.0 Models 8333, 8435, 8335, & 8336 Overview PDF
Ver. 1.0 Models PEL 102 & 103 Overview PDF
 
  Simple Logger II Series

Ver. 1.0

Simple Logger II

Overview PDF
  SCOPIX IV – OX9000 Series

Ver. 1.0

Ver. 1.0

LabView Drivers

LabWindows/CVI drivers:

LabWindowsCVI_SCOPIX_IV_ox9000.zip

LabWindowsCVI_SCOPIX_IV_ox9000.zip



 

Application Notes

Forms

Firmware

Technical Bulletins

Videos

What's New in DataView 3.50

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
MN103 1031.02 Leakage Current Probe Model MN103 $255.00
MN375 2115.41 AC Current Probe Model MN375 $275.00
MN255 2115.81 AC Current Probe Model MN255 $225.00 Consult Factory for Availability
MN261 2115.82 AC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC)
$252.00 Consult Factory for Availability
MN353 2116.27 AC Current Probe Model MN353 $260.00
MN373 2116.28 AC Current Probe Model MN373 $230.00
SR752 2116.32 AC Current Probe Model SR752 $359.00
SR759 2116.33 AC Current Probe Model SR759 $429.00 Consult Factory for Availability
2118.09 General Carrying Case
Dimensions: 13 x 9.5 x 3"
$73.50
2118.46 Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
$46.25
2118.49 Adapter - 110V Outlet Adapter w/4mm Banana Plugs for Models L230, L260, L261, L562, 8220 & 8230 $44.00
2119.84 Fuse - Set of 3, 0.1A, 380V, 5 x 20mm, 10kA for Models 5050/5060/5070/6505 $33.00
2126.49 Cable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant) $10.50
MN05 2129.19 AC Current Probe Model MN05
(100AAC/0.1VAC (1mV/A, 10AAC/10VAC (1V/A)
$225.00
MN251T 2132.59 AC Current Probe Model MN251T
(200A, 1mV/A, Lead)
$252.00 Consult Factory for Availability
2133.72 Small Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
$36.00
2139.74 Lead - Set of 2, 6.5ft Color-coded Red/Black Fused Leads (.63A) w/ 4mm Plug $114.00
2152.28 Lead - Set of 2, 6.5 ft. Color-coded (Red/Black) Fused Leads (0.63A); Two Screw-on Alligator Clips, Two Screw-on Test Probes, Set of 5, 0.63A Fuses (UL) $189.00
LM103 2153.05 AC Current Probe Model LM103 $309.00
MN03 2129.18 AC Current Probe Model MN03 (Discontinued replaced by Cat.#2129.19) $0.00 Discontinued
Model MN103
Cat. #1031.02
DescriptionLeakage Current Probe Model MN103
List Price$255.00
Model MN375
Cat. #2115.41
DescriptionAC Current Probe Model MN375
List Price$275.00
Model MN255
Cat. #2115.81
DescriptionAC Current Probe Model MN255
List Price$225.00
Consult Factory for Availability
Model MN261
Cat. #2115.82
DescriptionAC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC)
List Price$252.00
Consult Factory for Availability
Model MN353
Cat. #2116.27
DescriptionAC Current Probe Model MN353
List Price$260.00
Model MN373
Cat. #2116.28
DescriptionAC Current Probe Model MN373
List Price$230.00
Model SR752
Cat. #2116.32
DescriptionAC Current Probe Model SR752
List Price$359.00
Model SR759
Cat. #2116.33
DescriptionAC Current Probe Model SR759
List Price$429.00
Consult Factory for Availability
Model
Cat. #2118.09
DescriptionGeneral Carrying Case
Dimensions: 13 x 9.5 x 3"
List Price$73.50
Model
Cat. #2118.46
DescriptionAdapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
List Price$46.25
Model
Cat. #2118.49
DescriptionAdapter - 110V Outlet Adapter w/4mm Banana Plugs for Models L230, L260, L261, L562, 8220 & 8230
List Price$44.00
Model
Cat. #2119.84
DescriptionFuse - Set of 3, 0.1A, 380V, 5 x 20mm, 10kA for Models 5050/5060/5070/6505
List Price$33.00
Model
Cat. #2126.49
DescriptionCable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant)
List Price$10.50
Model MN05
Cat. #2129.19
DescriptionAC Current Probe Model MN05
(100AAC/0.1VAC (1mV/A, 10AAC/10VAC (1V/A)
List Price$225.00
Model MN251T
Cat. #2132.59
DescriptionAC Current Probe Model MN251T
(200A, 1mV/A, Lead)
List Price$252.00
Consult Factory for Availability
Model
Cat. #2133.72
DescriptionSmall Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
List Price$36.00
Model
Cat. #2139.74
DescriptionLead - Set of 2, 6.5ft Color-coded Red/Black Fused Leads (.63A) w/ 4mm Plug
List Price$114.00
Model
Cat. #2152.28
DescriptionLead - Set of 2, 6.5 ft. Color-coded (Red/Black) Fused Leads (0.63A); Two Screw-on Alligator Clips, Two Screw-on Test Probes, Set of 5, 0.63A Fuses (UL)
List Price$189.00
Model LM103
Cat. #2153.05
DescriptionAC Current Probe Model LM103
List Price$309.00
Model MN03
Cat. #2129.18
DescriptionAC Current Probe Model MN03 (Discontinued replaced by Cat.#2129.19)
List Price$0.00
Discontinued

DISCOVER THE CHAUVIN® ARNOUX GROUP