Voltage Absence Tester Model CA 771

An essential tool for electricians to ensure that voltage is not present before working on any electrical equipment or installation connected to the electrical system. Compliant with IEC 61243-3 Edition 2, the C.A 771 VAT can be used to work on any 1000V CAT IV installation. To meet the requirements of the standards in certain countries, these testers are available in two versions: equipped with IP2X test probes or without. The C.A 771 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50VAC / 120VDC.

Safety is ensured when testing GFCI and Residual Current Device (RCD) tripping by means of a double control system. Both hands are necessary to press the two buttons simultaneously. The integrated autotest checks the electrical circuits, power supply, displays and the condition of the measurement leads. Phase rotation measurement is simple and quick with the 2-wire microprocessor system. Audible and visual continuity testing is provided in compliance with Appendix B of the IEC 61243-3 standard. The tester can also detect stray voltages and offers unipolar phase identification.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status
CA 771 2121.14 Voltage Absence Tester Model C.A 771 (LEDs, 12VAC = U = 1000VAC; 12VDC = U = 1400VDC) $225.00
ModelCA 771
Cat. #2121.14
DescriptionVoltage Absence Tester Model C.A 771 (LEDs, 12VAC = U = 1000VAC; 12VDC = U = 1400VDC)
List Price$225.00

Model CA 771 - Cat. #2121.14: Includes (1) set of removeable test probes (red/black) Ø 2mm with crystal safety cover, probe-tip protection cap, (2) 1.5V LR06/AA batteries, velcro strap, and a user manual in five languages.

Print
Voltage Absence Testing (VAT)
  Voltage Indication - LEDs 12 to 1000Vac ; 12 to 1400Vdc
  Frequency Range DC, 16.67 to 800Hz
  Input Impedance >500kΩ
  Max. Peak Current 3.5mA RMS
  Polarity Indication Yes
  Redundant Hazardous
  Voltage Indication
The ELV (Extra-Low Voltage) LED indicates that the voltage is higher than the SELV (Safety Extra-Low Voltage) with the rate at which it flashes proportional to the voltage level.
  Stray Voltage Detection Yes (by low-impedance load switching)
RCD Tripping Yes (by low-impedance load switching)
Phase/Neutral Identification >50V (45 to 65HZ) ; >150V (16.67 to 45Hz)
Continuity & Resistance  
  Buzzer Trigger Threshold 100Ω typical (150Ω max.)
  Extended Continuity Test (resistance) 2kΩ, 60kΩ, 300kΩ
  Test Current / Open-circuit Voltage ≤ 1mA / ≤ 3.3V
Phase Rotation 2-wire method with microprocessor
  Ph/Ph Voltage 50 to 1000Vac (45 to 400Hz)
General  
Buzzer Intermittent beep for Voltage Detection,
Continuous beep for Continuity
Cable Length 3.3ft (1m)
Display LEDs
Power Supply 2 x AA (LR6) Batteries (included)
Battery Life 5000 ten second measurements approximately
Dimensions 9.0 x 2.4 x 1.5” (228 x 60 x 39mm)
Weight (With Battery) 12.4oz (350g) approximately
Operating Temperature/Humidity -22 to 140˚F (-30 to +60˚C) / 20 to 95% RH non-condensing
Storage Temperature/Humidity -40 to 158˚F  (-40 to +70˚C) / 20 to 95% RH non-condensing
IP Rating IP 65
Electrical Safety 1000V CAT IV per IEC 61010-1

User Manuals

Datasheets

Brochures

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
2118.65 Carrying Case for Clamp-on Meters and Multimeters $20.50
2119.48 Multi-purpose Canvas Pouch for Clamp-on Meters, Clamp-on Ground Testers, Power Meters Model 8220 & 8230
Dimensions: 11 x 5 x 2.25")
$39.00
Model
Cat. #2118.65
DescriptionCarrying Case for Clamp-on Meters and Multimeters
List Price$20.50
Model
Cat. #2119.48
DescriptionMulti-purpose Canvas Pouch for Clamp-on Meters, Clamp-on Ground Testers, Power Meters Model 8220 & 8230
Dimensions: 11 x 5 x 2.25")
List Price$39.00

DISCOVER THE CHAUVIN® ARNOUX GROUP