• Product meets UL established electrical standards.

AC Current Probe Model MN307

The MN307 is designed for low AC current measurements up to 10A, such as secondary of CTs or even small motors and appliances. It offers a higher voltage output of 100mV per Amp (1VAC @ 10AAC) for enhanced sensitivity at lower levels, while offering a high crest factor at full range. The MN307 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.
NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
MN307 2116.23 AC Current Probe Model MN307 $250.00
ModelMN307
Cat. #2116.23
DescriptionAC Current Probe Model MN307
List Price$250.00
Print
Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm
Current Range 10Arms AC
Measurement Range 0.1 to 12A
Output 5 ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio N/A
Output Signal 100mV/AAC (1V @ 10A)
Accuracy 50/60Hz 1%  @ 10A
Frequency Range 40Hz to 10KHz
Phase Shift At 50Hz 2.5° @ 10A
Open Secondary Voltage N/A
Load Impedance 1MΩ
Overload 20A continuous
Dimensions  (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight 6.3 oz (180g)
Operating Temperature 14° to +131°F  (-10 to +55°C)
Storage Temperature -40° to +158°F  (-40° to +70°C)
Operating Humidity 90% RH
Ingress Protection (Ip) IP40
Pollution Degree 2     
EMC EN 61326-1
Safety Compliance EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

User Manuals

Datasheets

Comparison Charts

Application Notes

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
1017.45 Adapter - 4mm non-insulated for safety leads $20.00
2118.09 General Carrying Case
Dimensions: 13 x 9.5 x 3"
$73.50
2118.46 Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
$46.25
2133.72 Small Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
$36.00
Model
Cat. #1017.45
DescriptionAdapter - 4mm non-insulated for safety leads
List Price$20.00
Model
Cat. #2118.09
DescriptionGeneral Carrying Case
Dimensions: 13 x 9.5 x 3"
List Price$73.50
Model
Cat. #2118.46
DescriptionAdapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
List Price$46.25
Model
Cat. #2133.72
DescriptionSmall Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
List Price$36.00

DISCOVER THE CHAUVIN® ARNOUX GROUP