AC Current Probe Model MN375

The MN375 is a compact AC current probe. It is designed to meet the most stringent demands in industry and electrical contracting. The Model MN375 meets EN 61010, 600V Cat. III safety standards and is CE marked and UL approved.
The Model MN375 has a 0.78" (20mm) jaw opening and will accommodate conductors up to 250kcmil. The unique hooked jaw design facilitates clamping and hooking into conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability.
The Model MN375 is a high performance models and uses a nickel core to improve accuracy and phase shift on the low end of the measurement range. The Model MN375 is an excellent probe to be used in power and low level current measurement application.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.

Model	Cat. #	Description	List Price	Quantity/Status	Distributor Stock Check
MN375	2115.41	AC Current Probe Model MN375 NIST Calibration ($68.00 each)	$288.00

Model	MN375
Cat. #	2115.41
Description	AC Current Probe Model MN375
List Price	$288.00
NIST Calibration ($68.00 each)

Maximum Conductor Size	0.78" (20mm), bus bar 20x5mm
Current Range	0.1 to 10A
Measurement Range	0.1 to 12A
Output	5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio	N/A
Output Signal	100mV/A AC (1V @ 10A)
Accuracy 60Hz	1% ± 1.5mV @ 10A
Frequency Range	40Hz to 3KHz
Phase Shift At 60Hz	1.5° @ 10A
Open Secondary Voltage	N/A
Load Impedance	1 MΩ
Overload	20A continuous
Dimensions (H x W x D)	5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight	6.3 oz (180g)
Operating Temperature	14° to +131°F (-10° to +55°C)
Storage Temperature	-40° to +158°F (-40° to +70°C)
Operating Humidity	90% RH
Pollution Degree	2
Ingress Protection (IP)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600 V Category CAT III, EN/IEC 61010-032

User Manuals

Model MN375

Datasheets

Model MN375 - English

Modelo MN375 - Español

Comparison Charts

Current Probe Selection Chart - English

Current Probe Selection Chart - Español

Application Notes

Glossary of Current Probe Terms

Cat. #	Description	List Price
1017.45	Adapter - 4mm non-insulated for safety leads	$20.50
2118.09	Case – General Carrying Case — Dimensions: (13 x 9.5 x 3) in	$73.50
2118.46	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)	$46.25
2133.72	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.	$38.00

Model
Cat. #	1017.45
Description	Adapter - 4mm non-insulated for safety leads
List Price	$20.50

Model
Cat. #	2118.09
Description	Case – General Carrying Case — Dimensions: (13 x 9.5 x 3) in
List Price	$73.50

Model
Cat. #	2118.46
Description	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)
List Price	$46.25

Model
Cat. #	2133.72
Description	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.
List Price	$38.00

By Industry

Other Product Lines