AC Current Probe Model MN251

The MN251 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN251 offers a voltage output of 1mV per Amp measured. The MN251 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.

Model	Cat. #	Description	List Price	Quantity/Status	Distributor Stock Check
MN251	2115.77	AC Current Probe Model MN251 (200A, 1mV/A, Lead)	$0.00	Discontinued

Model	MN251
Cat. #	2115.77
Description	AC Current Probe Model MN251 (200A, 1mV/A, Lead)
List Price	$0.00
Discontinued

Maximum Conductor Size	0.78" (20mm), bus bar 20x5mm
Current Range	200Arms AC
Measurement Range	0.1 to 240A
Output	5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio	1000:1
Output Signal	1mV/AAC (200mV @ 200A)
Accuracy 50/60Hz	1% ± 0.5A @ 200A
Frequency Range	40Hz to 10KHz
Phase Shift at 50Hz	2.5° @ 200A
Open Secondary Voltage	N/A
Load Impedance	1MΩ
Overload	240A for 10 min ON, 30 min OFF
Dimensions (H x W x D)	5.47 x 2.00 x 1.18” (139 x 51 x 30 mm)
Weight With 24” (610mm) Sensor	6.3 oz (180g)
Operating Temperature	14° to +131°F (-10° to +55°C)
Storage Temperature	-40° to +158°F (-40° to +70°C)
Operating Humidity	90% RH
Pollution Degree	2
Ingress Protection (IP)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600V CAT III, EN/IEC 61010-032

User Manuals

Models MN250 and MN251

Datasheets

Model MN251 - English

Modelo MN251 - Español

Comparison Charts

Current Probe Selection Chart - English

Current Probe Selection Chart - Español

Application Notes

Glossary of Current Probe Terms

Cat. #	Description	List Price
1017.45	Adapter - 4mm non-insulated for safety leads	$20.50
2118.09	Case – General Carrying Case — Dimensions: (13 x 9.5 x 3) in	$73.50
2118.46	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)	$46.25
2133.72	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.	$38.00

Model
Cat. #	1017.45
Description	Adapter - 4mm non-insulated for safety leads
List Price	$20.50

Model
Cat. #	2118.09
Description	Case – General Carrying Case — Dimensions: (13 x 9.5 x 3) in
List Price	$73.50

Model
Cat. #	2118.46
Description	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)
List Price	$46.25

Model
Cat. #	2133.72
Description	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.
List Price	$38.00

By Industry

Other Product Lines