Simple Logger® II Model L101

The Simple Logger® II Model L101 is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency 50 or 60Hz. Harmonic measurements are calculated from these 64 samples. Harmonics are only available from the Simple Logger® II Control Panel within the free DataView® software included with the unit. The L101 records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the inputs are ignored between measurement intervals.

Recommended Probes: 
MN379T
SR661
JM861
Other probes are compatible when using BNC adapter cat.# 2118.46. See our Probe Selection Chart for all compatible probes or contact AEMC for more information

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
L101 2126.02 Simple Logger® II Model L101 $0.00
Sale: $0.00		 Discontinued
ModelL101
Cat. #2126.02
DescriptionSimple Logger® II Model L101
List Price$0.00
Sale: $0.00
Discontinued
Print
Channels One
Input BNC
Ranges (2) 10mV to 1VAAC
Accuracy (50/60Hz) 10 to 50mV ±(0.5% R +1mV)
50 to 1000mV (0.5% R +0.5mV)
Resolution 0.1mVAC
Maximum Input Voltage 5Vrms or ± 7.07VPEAK
Input Impedance 800kΩ
Sample Rate 64 samples / cycle
Storage Rate Programmable from 125ms to 1 per day
Storage Modes Start/Stop, FIFO, extended mode (XRM) and Alarm
Recording Length 15 minutes to 6 weeks, programmable using DataView
Memory 240,000 measurements (512KB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication USB 2.0 optically isolated
Power Source 2x1.5V AA (LR6) alkaline batteries
Battery Life 100 hours to >45 days (depending of sample rate/recording length)
Dimensions 5.38 x 2.75 x 1.28” (136 x 70 x 32mm)
Sensor Optional current probe with BNC output (SR661, SL261, MN261)
Weight (with battery) 6.4 oz (180g)
Case Polycarbonate
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity Up to 85% @ 95°F (35°C)
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32 600V CAT III ; Pollution Degree 2

User Manuals

Simple Logger II - English

Simple Logger II Multi-lingual (CA France version)

Quick Start Guides

Simple Logger II

Datasheets

Model L101 - English

Modelo L101 - Español

Brochures

Simple Logger® II Data Loggers

AEMC® Instruments Product Line Brochure

Simple Logger II

Comparison Charts

Data Logger - Probe Selection Chart

Registradores de datos - Tabla de selecction de sondas

Software

DataView® Software

Ver. 3.63.0006     |   Models Supported by DataView

Release Date: September 29, 2023

DataView® Complete

Contains report generation and ALL DataView® control panels. If you don't want to download the entire DataView® package, simple scroll below to locate individual component installers.

Self-extracting Executable: v3.63.0006 .exe — We recommend you use the executable file to simplify the installation process. Click on the link to download it, double-click on the downloaded .exe file to begin the installation process, and follow the installation prompts.

Zipped File: v3.63.0006 (1.08 GB). zip — Alternatively you can manually extract the files from the zipped file. Please note: you should NEVER install these files from within the zipped file. You MUST extract them prior to installing.

 

IMPORTANT:

  • Back-up all template files before installation to ensure that they do not get overwritten.
  • Uninstall previous version of DataView before installing a new version.
  • PQL Loggers and Sentinel Series are no longer supported by DataView. See bottom of the page for a compatible version

Supported Operating Systems:
Windows 10 (32 & 64 Bit)
Widows 11 Pro

Minimum System Requirements

Click here for the Minimum System Requirements


Below are the individual DataView component installers

This is the DataView core report generation software without any control panels

DataviewCore3630006.exe format

DV Release Notes

NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 1110, 1246, 1227, 1510, 1550, 1821, 1822, 1823, L452, DL913, and DL914

Download v2.02.0293 .exe format

DL Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports model 8510

Download v1.02.0006 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports model 6417

Download v1.02.0011 .exe format

GTC Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6470, 6470-B, 6471, 6472, and 6474

Download v1.06.0009 .exe format

GTT Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6116, 6116N, and 6117

Download v1.07.0022 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 1060, 5060, 5070, 6550, 6555, 6526, 6532, and 6534

Download v4.02.0071 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 6240, 6250, 6255, and 6292

Download v1.07.0005 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8220, 8230, 3945, 3945-B, 407, 607, and 8335 (if using firmware ≤2.8)

Download v3.08.0019 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8333, 8335 (if using firmware >2.8), 8336, 8435, 8436

Download v1.07.13010 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: 8345

Download v1.2.14966 .exe format

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: PEL 52, PEL102, PEL103, and PEL105

Download v2.8.15349 .exe format

PEL Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.

This control panel supports models: L261, L264, CL601, L702, L101, L102, L104, L642, L111, L432, AL834, ML912, ML914, L322, L562, L564, L404, and L481

Download v1.05.0014 .exe format

SL II Release Notes

This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.


NOTE: PQL Loggers and Sentinel Series are no longer supported by DataView.

To obtain an older version of DataView that is compatible for these instruments, click the link below:

Download v3.09.0008 - .zip format

Supported Operating Systems:
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)

LabView Drivers

Procedures for installing the LabView drivers.   LabView Installation PDF

Digital Multimeters - MTX-3292B, MTX3292BT, MTX3293B, MTX3293-BT
Ver. 1.0 LabView Drivers
 
  Megohmmeters
Ver. 1.0 Model 1060 Overview PDF
Ver. 1.1 Models 5060 & 5070 Overview PDF
Ver. 1.0 Models 6550 & 6555 Overview PDF
 
  Power Quality & Energy
Ver. 1.0 Models 8333, 8435, 8335, & 8336 Overview PDF
Ver. 1.0 Models PEL 102 & 103 Overview PDF
 
  Simple Logger II Series

Ver. 1.0

Simple Logger II

 Overview PDF
  SCOPIX IV – OX9000 Series

Ver. 1.0

Ver. 1.0

LabView Drivers

LabWindows/CVI drivers:

LabWindowsCVI_SCOPIX_IV_ox9000.zip

LabWindowsCVI_SCOPIX_IV_ox9000.zip

 

Application Notes

Simple Logger II Containers from Mailing Tubes

Forms

Stored Measurement Results Form

Firmware

Simple Logger® II - Firmware

Technical Bulletins

Watts Current Issue 12

Videos

What's New in DataView 3.50

Introduction To Data Loggers

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
JM861 2110.90 AC Current Probe Model JM861
(30A, 10mV/A; 300A, 1mV/A & 3000A, 0.1mV/A, BNC) 		$750.00
1000-24-1-1 2112.39 AmpFlex-1000A, 24", 1mV/A $440.00 Consult Factory for Availability
300-24-2-10 2112.88 AmpFlex-30/300A, 24", 100mV/10mV/A $480.00 Consult Factory for Availability
1000-24-2-1 2112.98 AmpFlex-100/1000A, 24", 10mV/1mV/A $460.00 Consult Factory for Availability
30000-24-2-0.1 2113.33 AmpFlex-3000/30000A, 24", 1mV/0.1mV/A $509.00 Consult Factory for Availability
SR661 2113.49 AC Current Probe Model SR661
(10A, 100mV/A; 100A, 10mV/A & 1000A, 1mV/A, BNC) 		$349.00
MN375 2115.41 AC Current Probe Model MN375 $275.00
MN255 2115.81 AC Current Probe Model MN255 $225.00 Consult Factory for Availability
MN261 2115.82 AC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC) 		$252.00 Consult Factory for Availability
MN353 2116.27 AC Current Probe Model MN353 $260.00
MN373 2116.28 AC Current Probe Model MN373 $230.00
SR752 2116.32 AC Current Probe Model SR752 $359.00
SR759 2116.33 AC Current Probe Model SR759 $429.00 Consult Factory for Availability
2118.09 General Carrying Case
Dimensions: 13 x 9.5 x 3" 		$73.50
2118.46 Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III) 		$46.25
2126.49 Cable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant) $10.50
2133.72 Small Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5" 		$36.00
MN93-BK 2140.32 AC Current Probe Model MN93-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564 $240.00
MN193-BK 2140.36 AC Current Probe Model MN193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564 $329.00
MN379 2153.01 AC Current Probe Model MN379 $299.00
3000-24-2-0.3 DISCONTINUED 2114.87 AmpFlex-300/3000A, 24", 3.3mV/0.3mV/A DISCONTINUED $0.00 Discontinued
MN251 2115.77 AC Current Probe Model MN251
(200A, 1mV/A, Lead) 		$0.00 Discontinued
MF 300-6-2-10 2126.81 MiniFlex® 30/300A, 6", 100mV/10mV/A $0.00 Discontinued
MN03 2129.18 AC Current Probe Model MN03 (Discontinued replaced by Cat.#2129.19) $0.00 Discontinued
Model JM861
Cat. #2110.90
DescriptionAC Current Probe Model JM861
(30A, 10mV/A; 300A, 1mV/A & 3000A, 0.1mV/A, BNC)
List Price$750.00
Model 1000-24-1-1
Cat. #2112.39
DescriptionAmpFlex-1000A, 24", 1mV/A
List Price$440.00
Consult Factory for Availability
Model 300-24-2-10
Cat. #2112.88
DescriptionAmpFlex-30/300A, 24", 100mV/10mV/A
List Price$480.00
Consult Factory for Availability
Model 1000-24-2-1
Cat. #2112.98
DescriptionAmpFlex-100/1000A, 24", 10mV/1mV/A
List Price$460.00
Consult Factory for Availability
Model 30000-24-2-0.1
Cat. #2113.33
DescriptionAmpFlex-3000/30000A, 24", 1mV/0.1mV/A
List Price$509.00
Consult Factory for Availability
Model SR661
Cat. #2113.49
DescriptionAC Current Probe Model SR661
(10A, 100mV/A; 100A, 10mV/A & 1000A, 1mV/A, BNC)
List Price$349.00
Model MN375
Cat. #2115.41
DescriptionAC Current Probe Model MN375
List Price$275.00
Model MN255
Cat. #2115.81
DescriptionAC Current Probe Model MN255
List Price$225.00
Consult Factory for Availability
Model MN261
Cat. #2115.82
DescriptionAC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC)
List Price$252.00
Consult Factory for Availability
Model MN353
Cat. #2116.27
DescriptionAC Current Probe Model MN353
List Price$260.00
Model MN373
Cat. #2116.28
DescriptionAC Current Probe Model MN373
List Price$230.00
Model SR752
Cat. #2116.32
DescriptionAC Current Probe Model SR752
List Price$359.00
Model SR759
Cat. #2116.33
DescriptionAC Current Probe Model SR759
List Price$429.00
Consult Factory for Availability
Model
Cat. #2118.09
DescriptionGeneral Carrying Case
Dimensions: 13 x 9.5 x 3"
List Price$73.50
Model
Cat. #2118.46
DescriptionAdapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
List Price$46.25
Model
Cat. #2126.49
DescriptionCable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant)
List Price$10.50
Model
Cat. #2133.72
DescriptionSmall Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
List Price$36.00
Model MN93-BK
Cat. #2140.32
DescriptionAC Current Probe Model MN93-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564
List Price$240.00
Model MN193-BK
Cat. #2140.36
DescriptionAC Current Probe Model MN193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564
List Price$329.00
Model MN379
Cat. #2153.01
DescriptionAC Current Probe Model MN379
List Price$299.00
Model 3000-24-2-0.3 DISCONTINUED
Cat. #2114.87
DescriptionAmpFlex-300/3000A, 24", 3.3mV/0.3mV/A DISCONTINUED
List Price$0.00
Discontinued
Model MN251
Cat. #2115.77
DescriptionAC Current Probe Model MN251
(200A, 1mV/A, Lead)
List Price$0.00
Discontinued
Model MF 300-6-2-10
Cat. #2126.81
DescriptionMiniFlex® 30/300A, 6", 100mV/10mV/A
List Price$0.00
Discontinued
Model MN03
Cat. #2129.18
DescriptionAC Current Probe Model MN03 (Discontinued replaced by Cat.#2129.19)
List Price$0.00
Discontinued

DISCOVER THE CHAUVIN® ARNOUX GROUP