• Product meets UL established electrical standards.

AC Current Probe Model MN291 (refurbished)

The MN291 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN291 offers a VDC output of 100mVDC per AAC and may be used with loggers or other instruments with DC voltage input. The MN291 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
MN291 (refurbished) 901.2115.84 AC Current Probe Model MN291 (refurbished) $199.00
Sale: $119.40
ModelMN291 (refurbished)
Cat. #901.2115.84
DescriptionAC Current Probe Model MN291 (refurbished)
List Price$199.00
Sale: $119.40
Print
Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm
Current Range 200Arms AC
Measurement Range 0.5 to 240A
Output 5ft (1.5m) lead safety 4mm banana plug
Transformation Ratio N/A
Output Signal 100 mVDC/AAC (20VDC @ 200AAC)
Accuracy 50/60Hz 2%  @ 200A
Frequency Range 40Hz to 10KHz (-3dB)
Phase Shift At 50Hz N/A
Open Secondary Voltage N/A
Load Impedance 1MΩ
Overload 240A for 10 min ON, 30 min OFF
Dimensions (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight 6.3 oz (180g)
Operating Temperature 14° to +131°F  (-10° to +55°C)
Storage Temperature -40° to +158°F  ( -40° to +70 °C)
Operating Humidity 90% RH
Pollution Degree 2
Ingress Protection (Ip) IP40
EMC EN 61326-1
Safety Compliance EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

Datasheets

Model MN291 - English

Modelo MN291 - Español

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
1017.45 Adapter - 4mm non-insulated for safety leads $20.50
2118.09 Case – General Carrying Case — Dimensions: (13 x 9.5 x 3) in $73.50
2118.46 Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III) 		$46.25
2133.72 Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in.
For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914. 		$38.00
Model
Cat. #1017.45
DescriptionAdapter - 4mm non-insulated for safety leads
List Price$20.50
Model
Cat. #2118.09
DescriptionCase – General Carrying Case — Dimensions: (13 x 9.5 x 3) in
List Price$73.50
Model
Cat. #2118.46
DescriptionAdapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
List Price$46.25
Model
Cat. #2133.72
DescriptionSmall Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in.
For use with PEL Models: PEL 102 and PEL 103, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.
List Price$38.00

DISCOVER THE CHAUVIN® ARNOUX GROUP